For Battery types:

Lithium Polymer HV (1s to 8s balanced, 1s to 2s unbalanced), Lithium Polymer (1s to 8s balanced, 1s to 2s unbalanced) Lithium Ion (1s to 8s balanced, 1s to 2s unbalanced), Lithium Manganese (1s to 8s balanced, 1s to 2s unbalanced), A123 (LiFePO4) (1s to 8s balanced, 1s to 8s unbalanced), NiCd (1s to 21s), NiMH (1s to 21s), Lead Acid batteries (1s-12s Flooded, Gel, AGM, SLA)

Pack capacity: 50 mAh to 360Ah

Input voltage: 10-32VDC, reverse polarity protected

Input current: 1A to 60A, software limited

Power conversion: Synchronous DC/DC converter, 85% to 93% efficiency depending on output current

Output battery charge current: Adjustable range 25mA to 40A, limited by 60A input current*

Output battery discharge current: Internal discharge 25mA to 8A, 80W max, Regenerative discharge 25mA to 40A, 1200W max**

Continuous max output power: 600W @ +12VDC input, 1200W @ +24VDC

Cell balancing: 1s-8s Li or A123 (LiFePO4) balanced charging

Voltage calibration: Cell voltage measurements are factory calibrated to a standard traceable to NIST; calibration is to +/- 6 mV

Current calibration: Charge current is factory calibrated on a 4A standard; calibration is to +/- 1mA

Measurement accuracy:
Voltage resolution: 78uV (16 bit)
Voltage tolerance: +/- 6mV
Charge current: +/- 1%
Capacity added to pack: +/- 1%
Percent capacity ("Fuel"): +/- 5% (with accurate fuel table defined for battery being charged)

Interface: USB 2.0 Full Speed (12Mb/s)

Cooling fans: Twin, 13 CFM, 50mm diameter

Heat sink: Internal 120W aluminum, thin finned

Output battery connector: Modified JST XH series, 9 position max; accepts 1s-8s balance plugs on batteries

LCD: 2.6", 128 x 64 pixels graphic LCD with white LED backlight

Size: 5.82" x 6.55" x 3.57"

Footnotes:

* Please note, for safety reasons, available charger current may be limited for certain battery types and/or charging modes, e.g., non-balanced charge of Li, more than 6S cell count, etc.

** Please check bullet number 9 in the section titled "Major Features" (Features tab) for a detailed description of Regenerative Discharge

 

GT1200 (STD JST-XH balance port) 1200W Multichem. Charger with EC5 input cable (Combo with MPA-XH)

Revolectrix GT1200, Multi-Chemistry, 1200W Charger

Part Number: LCGT1200-EC5-MC 

Welcome to GT1200, the first high-power offering in the amazing NEW GT SERIES of R/C Battery Chargers from Revolectrix. Built on time-proven, reliable PowerLab hardware, this new 1200W, 1s-8s Charger provides a fresh approach to a more traditional user interface than the PowerLab series at an affordable price. Simplicity is the core thrust of the new user interface, boasting a larger, backlit dot-matrix LCD, allowing access to virtually every relevant parameter required to the routine charging, discharging, monitoring, and cycling of any battery chemistry available while at the same time providing easy-to-read feedback of key information during every operation; bigger screen, more information, easier to read. Adding to the intuitive feel, the new navigation wheel makes for quicker access to various menu options, and includes a SELECT/ENTER button. A separate BACK button rounds out the interface to allow the user to "back out" of menus and return to previous screens. 

The Cellpro GT1200 Charger directly supports balance charge of any 1s-8s LiPo or LiHV battery pack equipped with a JST XH balance connector without the use of an adapter. It also directly supports the Revolectrix MPA and SPA Smart Parallel Adapters; the safest parallel charging solutions on the market. Look for the MPA Combo in the REVO webstores. 

More on the GT SERIES Philosophy (TAKE IT ON THE ROAD): 

GT SERIES is all about simplicity and productivity at the field. It is not intended to replace the top-tier PowerLab series, but rather to offer an even simpler approach to common charging scenarios, straight out the box. The user interface is intuitive and instantly familiar, regardless of what charger you are using now. The PowerLab series remains the flagship of the Revolectrix product line; preset-driven with fully-customizable, "open architecture" presets, as well as graphing and data logging. When coupled with the PC Charge Control Software (CCS) the full potential of the Powerlab series can be unleased. In contrast, GT1200 series focus is ease of use as well as preset customization without the need for a PC. However, as with all Revolectrix charging products, the GT series does continue the long-standing ability to effortlessly and reliably update the firmware in the charger. With embedded USB support, connecting to a PC for this purpose has never been easier! 

This is not to say that the GT SERIES does not support presets. It does, but in a different, seamless way. The unit comes equipped with basic presets for all battery chemistries currently available as well as 28 EMPTY user preset positions. During the course of operation, any changes that are made at the charger may be named and saved down ("SAVE AS") or saved over ("SAVE") to the user presets bank. The process is analogous to opening a document in a PC application, making changes, and then using the "Save" or "Save As" menu options from the PC application to store the unique setup parameters chosen during the course of using the charger for its intended purpose; charging and managing your batteries. Best of all, everything happens at the charger, which makes it ideal for taking it on the road.

(400001288)

SKU 400001288
Brand Revolectrix

Be The First To Review This Product!

Help other RC Crew users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category