• Compact design for easy installation.
  • Compatible with sensored/sensorless brushless motors. In sensor mode, it’s compatible with most popular sensor- brushless motors on the market. In sensorless mode, it’ s compatible with 99% of brushless motors on the market.
  • Aluminum housing top with excellent heat dissipation and great current endurance.
  • The timing has been permanently set to 0 degree. With the identical competition motor, this ensures that every driver will have the same power system. 
  • Proportional brake with 4 steps of maximum brake force, 8 steps of drag brake force and 4 steps of initial brake force.
  • 9 levels of acceleration/ punch from “soft” to “aggressive” for different vehicles, tires and tracks.
  • Multiple protections: motor lock-up protection, low-voltage cutoff protection, thermal protection and fail safe (throttle signal loss protection).
  • Single-button ESC programming and factory reset.
  • Advanced programming via portable LED program card or multifunction LCD program box. ( Purchase separately)
  • Firmware upgrade via HOBBYWING multifunction LCD program box (PC), WiFi Express module (Mac & PC) (purchase separately) 
  • Cooling fan is included.
  • HOBBYWING's Innovative heat dissipation structure aluminum bottom case improves the heat dissipation - Patent pending
  • Pre-soldered professional grade gauge wires 
Specification XR10 Justock
Current Continuous:60A, Burst: 380A
Input * Note #1 2-3S LiPo or 4-9 cells NiMH/NiCd
Built-in BEC 6V@2A (linear mode BEC)
ESC programming Via RX Cable (or Throttle Control Cable)
Motor Supported Sensor and sensorless brushless motor
Motor KV Limit With 2 Lipo or 4-6 NiMH
1/10 on-road: >=8.5T, 1/10 off-road: >=11.5T 

With 3 Lipo or 7-9 NiMH
1/10 on-road: >=13.5T, 1/10 off-road: >=17.5T
Suitable Car 1/10,1/12 all competitions
1/10,1/8 rock crawler
Cooling Fan Powered by  stable BEC 6V
Size 33.5mm(L) * 28.5mm(W) * 30.5mm(H)
Weight 59.8g (w/o wires, cooling fan)
* Note #1
For 4-6 cells NiMH/NiCd or 2S LiPo, the standard cooling fan needn't be changed.
For 7-9 cells NiMH/NiCd or 3S LiPo, the standard cooling fan needs to be changed to 12V high voltage fan.

(500001282)

SKU 500001282
Brand Hobby Wing

Be The First To Review This Product!

Help other RC Crew users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category