BATTERY TRAY SYSTEM ASSEMBLY FOR SAB HELI DIVISION GOBLIN 630/700/770 SERIES HELICOPTERS

 

Note: the Battery Tray System Assembly provides the best support for the LiPos during flight, with an ultra-light and
high-strength frame design that provides exceptional support and holding-strength for the LiPos. The Assembly uses an
innovative and Patent Pending locking mechanism for fast and hassle-free installation and removal of the LiPos. In
addition, the Battery Tray Upgrade V2 is the identical tray to the AT700E-BTU-V2 design, that is a perfect match to the stock
rails of the TREX 700E (V1/V2/DFC) design for easy sharing between helicopters - without needing to remove the LiPos
from the trays between charges and flights. No modifications are needed to the frames for easy, drop-in fit installation.
Due to the differences in geometry of the KDE Direct Battery Tray Upgrade V2s, the stock ALIGN Battery Trays are
NOT compatible with this system (Parts #H70052, H70084, and H70085).

 

Important: please pay attention to the Installation Instructions and take
your time during the install, making sure to apply medium-strength Loctite
(Blue 243 or equivalent) to all screws during assembly unless otherwise
noted. In addition, make sure the Push Lock Lever is properly engaged
and flush with the Battery Tray Upgrade V2 before flight. Due to the
strength of the hold required, significant force by hand on the Push Lock
Lever is required to release the tray for removal.

 

Includes:
- One (1) Goblin 630/700/770 Series Battery Tray System Assembly
- One (1) Goblin 630/700/770 Series Aluminum Battery Tray System Primary Base Frame
- One (1) Goblin 630/700/770 Series Aluminum Battery Tray System Push Lock Lever
- One (1) Goblin 630/700/770 Series Battery Tray System Spring Steel Plate (AISI 1095 BTHC)
- Two (2) Flanged Radial Ball Bearings 3 x 6 x 2.5 mm
- Three (3) M3 x 0.5 x 8 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- Three (3) M3 x 0.5 x 5 mm Button Head Socket Head Cap Screws (Class 12.9 BP Alloy Steel)
- One (1) M3 x 8 mm Flat Washer (Cadmium-Plated Alloy Steel)
- Two (2) M3 x 4.8 x 0.3 mm Round Hole Shims (18-8 Stainless Steel)
- One (1) Goblin 630/700/770 Series Battery Tray Upgrade V2 (When Included)
- Six (6) KDE Direct LiPo Retaining Straps

 

Finish:
Clear anodize, mirror-polish CNC gloss Primary Base Frame
Clear hard-anodize (teflon-impregnation), mirror-polish CNC gloss Push Lock Lever

 

Weight:
83 g (design is FEA optimized for maximum strength and minimum weight)

 

Instruction Manual: http://kdedirect.com/files/SG630-700-770-BTSA_Installation_Diagram.pdf

 

(400000940)

SKU 400000940
Brand KDE

Be The First To Review This Product!

Help other RC Crew users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category